Dell Inspiron 11 3000 (3162)
This is an install and configuration guide for the Dell Inspiron 11 3000 (3162) laptop.
For a general overview of laptop-related articles and recommendations, see Laptop.
- 1 Before Installation
- 2 Base Install
- 3 Configuration
- 4 Hardware Details
This laptop uses UEFI. By default secure boot is enabled. Though is should be possible to set up a secure boot loader (Secure Boot), I chose to simple turn off secure boot. Also, though the laptop does support booting from legacy devices I discovered that this causes serious video issues (you can not boot into the CLI with KMS enabled but disabling KMS prevents X from starting). Simply turning off the legacy boot option fixes this issue.
This laptop hides the "Push XXX to enter setup" message during boot.
- Power on the laptop
- When the Dell logo appears, press ESC
- If timed right, two lines of text will appear in the lower right corner of the screen
- Press F2 to enter setup
Disabling Secure Boot
As mentioned above, disabling Secure Boot permanently may not be necessary but I was unable to find a way to boot the Arch install image without doing so.
Once in setup:
- Go to the "Boot" tab
- Disable "Secure Boot"
Disabling Load Legacy Option Rom
With this option enabled the laptop screen would shut off while booting the install media and when booting the installed system unless KMS was disabled. Disabling KMS, however, prevents X from starting as, from what I have read, the xf86-video-intell driver restyle="background: #afa; color: inherit; vertical-align: middle; text-align: center; "|Workingquires KMS.
Once in setup:
- Go to the "Boot" tab
- Disable "Load Legacy Option Rom"
Once setup has been configured, installation using the [Installation guide]] and General recommendations proceeded without issue. As this laptop uses an Intel processor, pay attention to the sections covering microcode updates.
works without issue.
The brightness hotkeys (Fn-F11 & Fn-F12) did not work for me out of the box but they might if you are using a full desktop environment like Gnome or KDE. Still, I had no trouble making the hotkeys work using information found on the Backlight and Extra keyboard keys pages and my window manager's documentation. My solution involved configuring my window manager to map the XF86MonBrightnessUp and XF86MonBrightnessDown keys to run the appropriate xbacklight command.
Wireless worked with no additional effort on my part. This is fairly important as this model does not include a wired port.
Most of the extra keys did not work for me after install. Some or all might work if you use a full desktop environment like Gnome or KDE though. I was able to configure my window manager to run appropriate commands when the extra keys are pressed. The Enable/Disable wireless key did work without any extra work on my part. However, the page up and page down keys (activated by pressing Fn + PageUp or PageDn) do not work as expected. After pressing and releasing them, the scrolling action will be glitched and will not stop. If you pressed PageUp, try pressing PageDn to neutralize the glitch.
When I first installed xorg, I installedas the only input driver. This caused the touchpad to react like a disembodied touchscreen. I then replaced with this caused the touchpad to work fine but the keyboard stopped working once I started X. With both and installed, the keyboard and touchpad both work fine.
The camera worked without effort on my part. I tested by installing running guvcview.
It works as expected.
The bluetooth hardware is recognized and the appropriate modules are loaded. I am also able to turn on power and detect other bluetooth devices. Pairing works, and so does file transfer from and to the device.
Suspend & Hibernate
Suspend works fine with no extra work on my part. Hibernate did not work for me but this is likely due to a misconfiguration on my part.
- CPU: Intel Celeron N3060
- GPU: Intel HD 400 (Braswell)
- RAM: 4 GB DDR3 1600 MHz
- HDD: 32 GB eMMC
- Wireless: Intel Centrino Wireless-AC 3160
- Bluetooth: 4.0
- Display: 11.6", 1366 x 768 px
- Camera: 720P (30FPS)
- Ports: HDMI (1.4a), 1xUSB (3.0), 1xUSB (2.0), 3.5mm Headphone/Microphone, MicroSD Card Reader
$ lspci 00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 35) 00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35) 00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 35) 00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 35) 00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 35) 00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 35) 00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 35) 00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 35) 00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 35) 01:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0bda:5769 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 76 Model name: Intel(R) Celeron(R) CPU N3060 @ 1.60GHz Stepping: 4 CPU MHz: 875.585 CPU max MHz: 2480.0000 CPU min MHz: 480.0000 BogoMIPS: 3201.33 Virtualization: VT-x L1d cache: 24K L1i cache: 32K L2 cache: 1024K NUMA node0 CPU(s): 0,1 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat